Select Page

China OEM Excavator Bulldozer Drive Gear, Chain Sprocket Segment 200dlc Sprocket

Product Description

1. Description:

Part No.: 200DLC SPROCKET
Description:  Sprocket
Logo:  Beneparts
Surface Hardness  52 ~ 58
Color:   Yellow or others
Production Method:  Casting / Forging
Material:  40Mn
   
   

2. Our products range

  
3. Our production line:

4.Popular items blow for reference:

Brand Model
Track Roller,                                                            Top Roller,                                                      Sprocket,                                                          Idler,                                                            Track Link,                                                         Track Shoes
  PC18-2 PC20-5/7 PC30-5/6/7/8 PC40-5/6/7
PC50/PC55 PC60-5/6/7 PC100-5/6/7 PC120-5-6-7
PC200-3/5/6/7/8 PC220-3/5/6/7/8 PC200LC-3/5/6/7/8 PC220-3/5/6/7/8
PC300-5-6-7 PC300LC-/5-6-7 PC350-5/6/7 PC350LC-5/6/7
PC360-5/6/7 PC360LC-5/6/7 PC400-1/3/5/6/7 PC400LC-1/3/5/6/7
PC450-5/6/7 PC450LC-5/6/7 PC600 PC800
   
   EX30 EX40 EX55 EX60-2/3/5
EX70 EX100-1/3/5/ EX120-1/3/5 EX150
EX200-1/2/3/5 EX200LC-1/2/3/5 EX220-1/2/3/5 EX220LC-1/2/3/5
EX270-1/2/5 EX270LC-1/2/5 EX300-1/2/3/5 EX300LC-1/2/3/5
EX330 EX330LC EX400-1/2/3/5 EX400LC-1/2/3/5
EX450-1/2/3/5 EX450LC-1/2/3/5 UH07-7 UH081
UH083 UH045 UH571  
   
    ZAX55 ZAX70 ZAX120 ZAX200
ZAX210 ZAX230 ZAX240 ZAX330
ZAX450      
   
  E38 55 (E55) E70B E120B
E303.5 E305.5 E305 311
312 (E312) 320 (E320) E200B 325 (E325)
330 (E330) 345 (E345) 320B 320C
320D 320BL 330B 330C
330BL 330D 325B 325BL
345      
   
   
  DH55 DH80 DH130 DH150
DH220 DH258 DH280 DH300
DH320 DH360 DH370 DH400
DH420 DH500    
DX300 DX370 DX380  
   
  SK035 SK035SR SK30 SK35
SK45 SK50-1 SK50-6 SK55
SK60-3 SK60-1/2/5 SK60-8 SK100
SK120 SK130-8 SK200-3/5/8 SK210
SK230 SK250 SK300 SK320
SK330 SK350 SK07N2  
   
  SH35 SH55 SH60 SH65
SH75 SH100 SH120 SH120A3
SH200 SH220 SH265 SH280
SH300 SH320 SH340 SH350
SH430 LS2800    
   
      HD250 HD400 HD450 HD700
HD770 HD820 HD1571 HD1250
HD1430      
   
   R55 R60-5/7/8 R80 R130
R150LC-7 R200 R210-3 R220-5
R225-7 R275 R290 R300
R320 R305 R360 R450
   
  R914 R924 R934C R944C
   
  CX35 CX45 CX55 CX240
   
    KX35 KX50 KX55 KX80
KX185      
   
   SWE35 SWE40 SWE50 SWE55
SWE60 SWE70 SWE85 SWE330
   
  IHI30 IHI35 IHI80 IHI85
   
  TB150 TB175    
   
  FR65 FR85    
   
   
     SY65 SY200 SY215 SY330
   
  YC13 YC35 YC45 YC60
YC85 YC135    
   
   
  VIO30 YM30 VIO35 YM35 VIO40 YM40 VIO55 YM55
VIO75 YM75      
   
   D3B D3C D4 D4D D4E
D4H D5 D5B D5C
D5H D5M D5N D6
D6C D6D D6R D6H
D6T D7G D7R D7H
D8N D8L D8T D8R
D8H D8K D9L D9N
D9R D9T D10N D10R
D10T D11N D11R  
   
  D20 D31 D37EX-21 D40
D41P-6 D41E-6 D50 D53
D51EX-22 D60 D65 D65-12
D61EX-12 D65EX-12 D65PX-12 D80
D85 D85EX-15 D85-21 D155
D155A-1 D155A-2 D155A-3 D155A-5
D155-6 D275 D355A-3 D375-5
BD2G      

5. Our warehouse:

6.Company information

HangZhou CZPT Machinery co., Ltd as your reliable Undercarriage parts supplier, offering full range of replacement parts suitable for all kinds of earthmoving machines which apply to mining, construction, agriculture etc. Like Excavator, Bulldozer, Loader, Backhoe, Scraper, Crusher and so on. The replacement parts that we supply including casting parts like idler, sprocket, top roller, track link, track roller, track shoes…, etc. and forged parts like forged idler, sprocket, top roller, track link, track roller, track shoes…, etc. 
 
Beneparts has a very strong sales team and firmly cooperated manufacturer with high-tech and focus on quality with more than 28 years experience.
 
Our advantages are 4 fold, our:
1.strong technical team, and we have the ability to formulate materials to meetthe specific needs of our customer’s projects.
2.Perfect quality monitoring system, and full range of advanced facilities, like Component analysis machine, Impact Machine, Tensile Strength machine etc.
3. Rich experience to do OEM/ODM business, we can develop items as per drawings and samples if you have specific requirement.
4. Efficient management, we can short delivery time and we have good after sale service which keep long term business cooperation with our customers.
 
Our commitment to you is always providing quick, convenient, effective customer service.
Look CZPT to meeting you!
 

Type: Sprocket
Application: Excavator
Certification: CE, ISO9001: 2000
Condition: New
Production Method: Forging/Casting
Material: 35mnbh/40mn2
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

drive sprocket

How do I calculate the required torque and power for a drive sprocket setup?

Calculating the required torque and power for a drive sprocket setup involves several factors that need to be considered. The torque and power requirements depend on the application’s specific parameters, such as the desired speed, load, and efficiency of the system. Here’s a step-by-step guide on how to calculate the required torque and power:

  1. 1. Determine the Load: Identify the load that the drive sprocket needs to move or rotate. The load can be expressed in units of force, such as pounds or newtons.
  2. 2. Calculate the Torque: Torque is the rotational force applied to the drive sprocket to generate motion. The formula to calculate torque is:

Torque (in Nm) = Load (in N) x Radius of the Drive Sprocket (in meters)

where the radius is the distance from the center of the sprocket to the point where the force is applied. If the radius is not given directly, you can use the diameter and divide it by two to get the radius.

  1. 3. Account for Efficiency Losses: In real-world systems, some power is lost due to friction and other factors. To account for these losses, you can introduce an efficiency factor (η) into the equation. The formula becomes:

Torque (in Nm) = (Load (in N) x Radius of the Drive Sprocket (in meters)) / Efficiency (η)

  1. 4. Calculate the Rotational Speed: Determine the required rotational speed of the drive sprocket in revolutions per minute (RPM) or radians per second (rad/s).
  2. 5. Calculate the Power: Power is the rate at which work is done. It is the product of torque and rotational speed. The formula to calculate power is:

Power (in watts or horsepower) = Torque (in Nm) x Rotational Speed (in rad/s)

or

Power (in watts or horsepower) = (Torque (in Nm) x Rotational Speed (in RPM) x 2π) / 60

where 2π is a constant used to convert RPM to rad/s, and 60 is used to convert seconds to minutes.

By following these steps and plugging in the appropriate values, you can calculate the required torque and power for your drive sprocket setup. Keep in mind that real-world conditions may vary, so it’s essential to consider safety factors and any additional loads that may be present in the system.

drive sprocket

What are the best practices for storing spare drive sprockets when not in use?

Proper storage of spare drive sprockets is essential to maintain their performance and longevity. When not in use, follow these best practices for storing spare drive sprockets:

  • Clean the Sprockets: Before storing, make sure the sprockets are clean and free from dirt, debris, or any contaminants. Use a brush or cloth to remove any buildup on the sprocket’s teeth and surfaces.
  • Inspect for Damage: Check the sprockets for any signs of wear, damage, or deformation. If you notice any issues, address them before storage, or consider replacing the sprocket if necessary.
  • Keep in a Dry Environment: Store the sprockets in a dry and controlled environment to prevent rust or corrosion. Moisture can lead to deterioration of the sprockets over time.
  • Avoid Direct Sunlight: Keep the sprockets away from direct sunlight or sources of heat. Prolonged exposure to sunlight can degrade certain materials and affect the sprockets’ performance.
  • Use Original Packaging: If possible, store the sprockets in their original packaging. The original packaging provides protection and prevents them from coming into contact with other objects that may cause damage.
  • Keep Away from Chemicals: Avoid storing the sprockets near any chemicals or substances that could potentially cause damage or reactions with the material of the sprockets.
  • Organize and Label: If you have multiple spare sprockets, organize and label them accordingly for easy identification and retrieval.
  • Elevate from the Ground: Store the sprockets on pallets, shelves, or racks to keep them off the ground and away from potential hazards or moisture.
  • Rotate Stock: If you have a stock of spare sprockets, rotate them periodically to ensure that older sprockets are used first, preventing any sprockets from sitting in storage for too long.

By following these best practices, you can ensure that your spare drive sprockets remain in good condition and are ready for use whenever they are needed.

drive sprocket

Can drive sprockets be used in combination with different types of chains?

Yes, drive sprockets can be used in combination with different types of chains, provided that the sprocket’s pitch matches the pitch of the chain. The pitch of a sprocket refers to the distance between the centers of adjacent teeth, while the pitch of a chain refers to the distance between the centers of two consecutive pins. For proper engagement and smooth power transmission, the sprocket’s pitch must be the same as the chain’s pitch.

There are several types of chains used in power transmission systems, and each type has its specific application and benefits:

  1. Roller Chains: Roller chains are the most common type of chains used with drive sprockets in various industrial applications. They consist of cylindrical rollers that engage with the sprocket teeth, providing excellent load-carrying capacity and efficiency.
  2. Engineered Chains: Engineered chains are specialized chains designed for specific applications, such as those requiring high strength, corrosion resistance, or specific environmental conditions. They are compatible with corresponding engineered sprockets.
  3. Leaf Chains: Leaf chains are used in applications with heavy loads and moderate speeds. They consist of interlocking plates connected by pins and are commonly used in forklifts and lifting mechanisms.
  4. Timing Belts: In some cases, timing belts can be used in place of chains with drive sprockets. Timing belts have teeth that engage with the sprocket teeth, providing accurate timing and smooth motion in precision applications.

When selecting a chain and drive sprocket combination, it is essential to consider factors such as the application’s load requirements, speed, environmental conditions, and desired efficiency. Using the appropriate chain type and ensuring proper sprocket alignment and tensioning are critical for the system’s reliable operation and longevity.

Consulting with chain and sprocket manufacturers or experienced engineers can help in choosing the right chain and sprocket combination to meet the specific needs of the power transmission system.

China OEM Excavator Bulldozer Drive Gear, Chain Sprocket Segment 200dlc Sprocket  China OEM Excavator Bulldozer Drive Gear, Chain Sprocket Segment 200dlc Sprocket
editor by CX 2023-10-01

Recent Posts

drivesprocket

As one of leading drivesprocket manufacturers, suppliers and exporters of mechanical products, We offer drivesprocket and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.