Product Description
Product Parameters
Company Profile
-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLAAS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.
Production Capacity Equipment
-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.
Our Advantages
1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.
Product Advantages
Certifications
-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.
Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!
Broad Customer Channels Market Continues to Develop!
International Exhibition
CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!
Packaging & Shipping
| Packaging Details: | Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization |
Related Products:
FAQ:
1. Are you manufacturer or trade Company?
We are a factory focused on producing and exporting Chain over 23 years,have a professional international trade team.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, L/C at sight
3. What is your lead time for your goods?
Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any Show?
We attend Hannover show in Germany, EIMA in Italy, CZPT in France, CIAME in China and many other Agricultural machinery shows.
5.Do you offer free samples?
Yes,we can.or you just bear the shipping cost.
6.Is OEM available?
Yes, OEM is available. We have professional designers to help you design.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | Order Sample Sprocket Samples
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do I troubleshoot common issues that may arise with drive sprockets?
Drive sprockets, like any other mechanical components, can experience various issues during operation. Understanding and troubleshooting these common problems can help ensure the smooth functioning of the power transmission system. Here are some common issues and their troubleshooting steps:
- 1. Excessive Wear: If the sprocket shows signs of excessive wear, such as elongated teeth or a shiny appearance, it may lead to poor chain engagement and premature failure. The troubleshooting steps include inspecting the chain for wear, ensuring proper tension, and replacing both the worn sprocket and chain.
- 2. Chain Skipping or Jumping: Chain skipping or jumping over the sprocket teeth can occur due to misalignment, worn sprocket teeth, or improper tension. Troubleshooting involves checking the alignment of the sprockets and ensuring the chain tension is within the recommended range.
- 3. Noisy Operation: Unusual noise during operation can be caused by misalignment, loose components, or worn-out sprockets. Inspecting and realigning the sprockets, tightening fasteners, and replacing worn parts can resolve the issue.
- 4. Corrosion: Corrosion can occur in harsh environments or when exposed to moisture. Regular inspection and proper lubrication can help prevent corrosion. If corrosion is present, replacing the affected sprockets with corrosion-resistant ones is necessary.
- 5. Fatigue or Cracks: Fatigue and cracks in the sprocket may result from high loads or stress concentrations. If such issues are observed, the sprocket should be replaced immediately to prevent catastrophic failure.
- 6. Incorrect Gear Ratio: If the machinery’s speed or torque requirements are not being met, it may indicate an incorrect gear ratio. Double-checking the sprocket teeth count and adjusting the gear ratio as needed can address this problem.
- 7. Excessive Heat: Overheating of the sprockets can lead to premature wear and reduced efficiency. It can be caused by overloading, improper lubrication, or inadequate ventilation. Identifying the root cause and rectifying it can resolve the heat-related issues.
Regular inspection, maintenance, and proper lubrication of drive sprockets are essential to prevent and address these common issues. If troubleshooting efforts do not resolve the problems or if there are concerns about the sprockets’ integrity, it is advisable to consult with a qualified engineer or a professional from the sprocket manufacturer to identify and address the specific issue properly.
What are the environmental impacts of drive sprocket manufacturing?
Drive sprocket manufacturing, like any industrial process, can have environmental impacts throughout its lifecycle. Here are some of the key environmental considerations related to drive sprocket manufacturing:
1. Raw Material Extraction: The production of drive sprockets requires raw materials such as steel, aluminum, or other metals. The extraction of these materials can lead to habitat destruction, water pollution, and energy consumption.
2. Energy Consumption: Manufacturing processes, including machining, forging, and heat treatment, consume significant amounts of energy. This energy is often derived from fossil fuels, leading to greenhouse gas emissions and contributing to climate change.
3. Waste Generation: Manufacturing processes generate waste, such as metal shavings, dust, and wastewater. If not managed properly, these wastes can pollute the environment and harm ecosystems.
4. Chemical Use: Some manufacturing processes involve the use of chemicals for cleaning, coating, or plating. Improper handling and disposal of these chemicals can lead to environmental contamination.
5. Transportation: The transportation of raw materials, components, and finished drive sprockets can contribute to air pollution and carbon emissions.
6. End-of-Life Disposal: At the end of their useful life, drive sprockets may be discarded. If not recycled or disposed of properly, they can end up in landfills, adding to the waste problem.
7. Sustainable Practices: To mitigate these environmental impacts, manufacturers can adopt sustainable practices. This includes using recycled materials, optimizing energy use, reducing waste generation, and implementing cleaner production technologies.
8. Life Cycle Assessment (LCA): Conducting a life cycle assessment of drive sprocket manufacturing can help identify areas of high environmental impact. LCA evaluates the environmental performance of the product from raw material extraction to end-of-life disposal.
9. Certifications: Manufacturers can pursue certifications such as ISO 14001 (Environmental Management Systems) to demonstrate their commitment to reducing environmental impacts.
10. Recycling and Reuse: Encouraging the recycling and reuse of drive sprockets can reduce the demand for new raw materials and decrease waste.
11. Product Design: Optimize the design of drive sprockets for efficiency and durability, which can extend their lifespan and reduce the need for frequent replacements.
By implementing environmentally friendly practices and considering the entire lifecycle of drive sprockets, manufacturers can reduce their environmental footprint and contribute to a more sustainable future.
How do I choose the right size and pitch of a drive sprocket for my specific application?
Choosing the correct size and pitch of a drive sprocket is essential to ensure the proper functioning and efficiency of the power transmission system. Here are the steps to help you select the right drive sprocket for your specific application:
- Identify the Power Requirements: Determine the amount of power (torque and speed) required to drive the driven component. Consider factors such as load, operating conditions, and the desired speed of the driven component.
- Calculate the Gear Ratio: Calculate the desired gear ratio between the driving and driven sprockets. The gear ratio is determined by dividing the number of teeth on the driven sprocket by the number of teeth on the driving sprocket. Adjusting the gear ratio allows you to control the speed and torque of the driven component.
- Choose the Pitch: The pitch of the sprocket should match the pitch of the chain or belt in the system. The pitch refers to the distance between adjacent chain or belt links. Common pitch sizes include 0.25″, 0.375″, 0.5″, 0.625″, and 0.75″. Ensure that both the chain or belt and the sprocket have the same pitch to achieve proper engagement and smooth power transfer.
- Select the Number of Teeth: Once you have the desired gear ratio and the pitch size, calculate the number of teeth needed on each sprocket. The number of teeth on the driven sprocket should be divided by the gear ratio to determine the number of teeth on the driving sprocket.
- Consider the Sprocket Material: The material of the sprocket is crucial, especially in high-load or high-speed applications. Common materials include steel, stainless steel, and aluminum. Each material has its own set of properties, including strength, weight, and resistance to wear and corrosion. Choose the material that best suits the demands of your application.
- Check for Compatibility: Ensure that the chosen sprocket is compatible with the specific chain or belt you are using. The sprocket’s tooth profile and pitch diameter should match the chain or belt’s design for proper engagement and smooth operation.
- Consider Environmental Factors: If your application operates in extreme conditions, such as high temperatures or corrosive environments, choose a sprocket material that can withstand these conditions without compromising performance.
- Consult with Experts: If you are unsure about the right size and pitch of the drive sprocket for your application, consult with experienced engineers or sprocket manufacturers. They can provide valuable insights and recommend the most suitable sprocket for your specific needs.
By following these steps and considering the specific requirements of your application, you can select the right size and pitch of the drive sprocket to ensure optimal performance, efficiency, and longevity of your power transmission system.
editor by CX 2024-03-13