Product Description
Product Parameters
Company Profile
-HangZhou Choho Industrial Co., Ltd. is a leading company in the domestic chain transmission industry. the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise, and the first A-share listed company in China’s chain drive industry. The stock code is 003033.
-Relying on industry-leading R&D technology, product quality and service, CHOHO has achieved plenty of high-quality customers. We supply vehicle chain system products for CZPT vehicle manufacturers such as Honda, Yamaha, Suzuki, DaHangZhouang, CF MOTOR, HangZhou Motorcycles, Knorr-Bremse etc.; Supply agricultural chain system products for CZPT agricultural machinery manufacturers at home and abroad, such as German CLAAS and LOVOL; Supply industrial equipment chain system products for CZPT enterprises such as ZheJiang HangZhouan, HangZhou Logistics, HangZhou Kejie and Sinsong Robotics. The trademark has been registered in many countries, and the products are exported to a great number of countries and regions in Europe, America, Southeast Asia, South America, Africa etc., serving more than 3,000 after-sales customers.
Production Capacity Equipment
-By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.
Our Advantages
1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.
Product Advantages
Certifications
-CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.
Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!
Broad Customer Channels Market Continues to Develop!
International Exhibition
CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!
Packaging & Shipping
| Packaging Details: | Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization |
Related Products:
FAQ:
1. Are you manufacturer or trade Company?
We are a factory focused on producing and exporting Chain over 23 years,have a professional international trade team.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, L/C at sight
3. What is your lead time for your goods?
Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any Show?
We attend Hannover show in Germany, EIMA in Italy, CZPT in France, CIAME in China and many other Agricultural machinery shows.
5.Do you offer free samples?
Yes,we can.or you just bear the shipping cost.
6.Is OEM available?
Yes, OEM is available. We have professional designers to help you design.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | Order Sample Sprocket Samples
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do I troubleshoot common issues that may arise with drive sprockets?
Drive sprockets, like any other mechanical components, can experience various issues during operation. Understanding and troubleshooting these common problems can help ensure the smooth functioning of the power transmission system. Here are some common issues and their troubleshooting steps:
- 1. Excessive Wear: If the sprocket shows signs of excessive wear, such as elongated teeth or a shiny appearance, it may lead to poor chain engagement and premature failure. The troubleshooting steps include inspecting the chain for wear, ensuring proper tension, and replacing both the worn sprocket and chain.
- 2. Chain Skipping or Jumping: Chain skipping or jumping over the sprocket teeth can occur due to misalignment, worn sprocket teeth, or improper tension. Troubleshooting involves checking the alignment of the sprockets and ensuring the chain tension is within the recommended range.
- 3. Noisy Operation: Unusual noise during operation can be caused by misalignment, loose components, or worn-out sprockets. Inspecting and realigning the sprockets, tightening fasteners, and replacing worn parts can resolve the issue.
- 4. Corrosion: Corrosion can occur in harsh environments or when exposed to moisture. Regular inspection and proper lubrication can help prevent corrosion. If corrosion is present, replacing the affected sprockets with corrosion-resistant ones is necessary.
- 5. Fatigue or Cracks: Fatigue and cracks in the sprocket may result from high loads or stress concentrations. If such issues are observed, the sprocket should be replaced immediately to prevent catastrophic failure.
- 6. Incorrect Gear Ratio: If the machinery’s speed or torque requirements are not being met, it may indicate an incorrect gear ratio. Double-checking the sprocket teeth count and adjusting the gear ratio as needed can address this problem.
- 7. Excessive Heat: Overheating of the sprockets can lead to premature wear and reduced efficiency. It can be caused by overloading, improper lubrication, or inadequate ventilation. Identifying the root cause and rectifying it can resolve the heat-related issues.
Regular inspection, maintenance, and proper lubrication of drive sprockets are essential to prevent and address these common issues. If troubleshooting efforts do not resolve the problems or if there are concerns about the sprockets’ integrity, it is advisable to consult with a qualified engineer or a professional from the sprocket manufacturer to identify and address the specific issue properly.
How do I calculate the gear ratio for a drive sprocket and chain setup?
Calculating the gear ratio for a drive sprocket and chain setup involves understanding the relationship between the number of teeth on the sprockets in the system. The gear ratio is a crucial factor that determines the speed and torque output of the system. Here’s how you can calculate the gear ratio:
- Count the Teeth: Begin by counting the number of teeth on both the driving sprocket (connected to the power source) and the driven sprocket (connected to the load).
- Divide the Number of Teeth: Divide the number of teeth on the driven sprocket by the number of teeth on the driving sprocket.
The formula for calculating the gear ratio (GR) can be expressed as:
GR = Number of Teeth on Driven Sprocket / Number of Teeth on Driving Sprocket
For example, if the driven sprocket has 20 teeth and the driving sprocket has 10 teeth, the gear ratio would be:
GR = 20 / 10 = 2
In this case, the gear ratio is 2, which means that the driven sprocket will rotate twice for every single rotation of the driving sprocket. Gear ratio values greater than 1 indicate that the driven sprocket rotates at a higher speed than the driving sprocket, providing an increase in speed with a corresponding decrease in torque. Conversely, gear ratio values less than 1 indicate a reduction in speed and an increase in torque.
It’s essential to consider the gear ratio carefully when designing a drive sprocket and chain setup for specific applications. The gear ratio determines the mechanical advantage of the system, affecting its overall performance, speed, and torque output. By selecting the appropriate sprocket sizes and gear ratio, you can optimize the efficiency and functionality of the power transmission system for your particular machinery or equipment.
Advantages of Using Drive Sprockets over Other Methods of Power Transmission
Drive sprockets offer several advantages over other methods of power transmission, making them a popular choice in various applications. Here are the key advantages:
- Efficiency: Drive sprockets and chains have high mechanical efficiency, typically around 98% to 99%, which means minimal power loss during transmission. This efficiency is crucial in applications where energy conservation is essential.
- High Load Capacity: Sprockets and chains are capable of handling heavy loads and transmit substantial amounts of power, making them suitable for various industrial and machinery applications.
- Reliability: Sprocket and chain systems are known for their reliability and durability. They can withstand challenging conditions, such as high loads, shock loads, and adverse environmental factors, without compromising performance.
- Adjustability: By changing the sprocket’s size or the number of teeth, the gear ratio can be easily adjusted to meet specific speed and torque requirements. This adjustability allows for versatility in various applications.
- Simple Design: Sprockets and chains have a relatively simple design, which makes them easy to manufacture, install, and maintain. Additionally, they require minimal lubrication compared to other types of power transmission systems.
- Long Service Life: When properly maintained, sprockets and chains have a long service life, reducing the need for frequent replacements and lowering overall maintenance costs.
- Wide Range of Sizes and Configurations: Sprockets are available in various sizes, tooth profiles, and materials, allowing for customization to fit specific applications. This wide range of options makes them suitable for diverse industries and machinery types.
- Quiet Operation: Compared to some other power transmission methods, such as gears, sprockets and chains produce less noise during operation, making them desirable for noise-sensitive environments.
- Compact Design: Sprocket and chain systems can transmit power over relatively long distances while maintaining a compact design. This makes them suitable for applications with space constraints.
Despite these advantages, it is essential to consider the specific requirements of the application and the characteristics of the load to ensure that a sprocket and chain system is the most suitable power transmission method for the intended use.
editor by CX 2024-03-19